BMC Sealing Technology (Suzhou) Co., Ltd
Tel:13915776298中文

ABOUT US

关于我们

Product

Company News

Location:Home  >  Company News

Baohua Sealing Technology Sharing | Mechanical Behavior of Gaskets: p‑T Test Standard(2)

Time:2026-11-16 Views:1

The p-T value can serve as a basic guideline for material selection.

However, it is only a starting point, not a definitive solution.


Leakage, insufficient service life, material failure and structural deformation in real-world equipment often cannot be resolved simply by switching materials, products or suppliers.

 

2026111613596431.jpg

Metal C-rings: resistant to extreme temperatures, high pressure and high vacuum

 

Yet more questions should be raised: Why did the failure occur? What are the boundary conditions? What are the key variables?

The p-T value indicates the material’s resistance capability, yet thickness, structure, medium and assembly all affect the final performance.


Baohua adopts an approach based on actual equipment and operating conditions: first conduct on-site investigation and surveying to clarify requirements for temperature, pressure, medium, cycling, leakage and service life; then analyze failure mechanisms and formulate engineering hypotheses; next carry out sealing system design, material and product configuration, engineering calculations for pre-tightening load and installation torque, followed by laboratory verification.


 20261116135911200.jpg

Manhole Gasket for BMC Voltage Regulator

 

After scheme confirmation, implementation must cover manufacturing support, product marking, onsite installation and operational feedback. Only when the p-T relationship is verified in realworld equipment can gasket selection evolve from empirical judgment to a well-founded systematic solution.

For complete-machine sealing solutions, legacy-equipment retrofits or recurring-leakage issues, discussion can start from a single piece of equipment, one system or an onsite maintenance event.

 

Ingenious Seal Mastery

If you have any doubts about sealing technology, please pay attention to BMC Baohua and feel free to consult, comment, or leave a message!  Thank you! We will continue to talk about the p~T Test Standard in the next issue.See you next time!